Code No. B1144 ESL actuation not completed
DIAGNOSTIC FUNCTION
JUDGEMENT CRITERIA
Check Conditions
- After OSS-ECU activation
- Control completion information is not received from the electric steering lock.
PROBABLE CAUSES
- Electric steering lock malfunction
- LIN bus line malfunction
- Malfunction of OSS-ECU
DIAGNOSIS PROCEDURE |
STEP 1. Check of short to power supply, short of earth and open circuit in LIN line between electric steering lock connector and OSS-ECU connector |
Q.
Is the check result normal?
|
 Go to Step 2. |
|
 Repair the connector(s) or wiring harness. |
|
STEP 2. After performing the locking and unlocking operations of the electric steering lock, recheck the diagnosis code. |
Q.
Is the diagnosis code set?
|
Replace the electric steering lock and register the chassis number (Refer to  ).
Then go to Step 3. |
|
| Go to Step 3. |
|
STEP 3. Check whether the diagnosis code is reset. |
Q.
Is the diagnosis code set?
|
| Replace the OSS-ECU and register the chassis number (Refer to ). |
|
| Intermittent malfunction is suspected (Refer to GROUP 00 - How to Use
Troubleshooting/Inspection Service Points - How to Cope with Intermittent Malfunction ). |
|