Inspection Procedure 11: The wiper-linked auto lamp function does not work normally. <Vehicles with photo sensor>



caution
  • Before replacing the ECU, ensure that the power supply circuit, the earth circuit and the communication circuit are normal.
  • When the ETACS-ECU of vehicles without KOS is replaced, the encrypted code of the ignition key needs to be registered to the ETACS-ECU. (If the encrypted code is not registered, the engine cannot be started. Register the encrypted code as described in Immobilizer System - How to Register Key ID .)


OPERATION




  • Auto lamp switch
  • Windshield wiper switch

COMMENTS ON TROUBLE SYMPTOM




PROBABLE CAUSES



  • Malfunction of the lighting switch
  • Malfunction of windshield wiper switch
  • Malfunction of the ETACS-ECU
  • Damaged harness wires and connectors

DIAGNOSIS PROCEDURE


STEP 1. ETACS-ECU customise function check



Q. Is the check result normal?





STEP 2. Windshield wipers operation check



Q. Is the check result normal?





STEP 3. Check the auto lamp function operation.



Q. Is the check result normal?





STEP 4. Retest the system



Q. Is the check result normal?