Code No.U0141 ETACS CAN timeout


caution
  • If the diagnosis code No. U0141 is set, be sure to diagnose the CAN bus line.
  • Before replacing the ECU or combination meter, ensure that the power supply circuit, the earth circuit and the communication circuit are normal.
  • When the ETACS-ECU of vehicles without KOS is replaced, the encrypted code of the ignition key needs to be registered to the ETACS-ECU. (If the encrypted code is not registered, the engine cannot be started. Register the encrypted code as described in Immobilizer System - How to Register Key ID .)

DIAGNOSTIC FUNCTION



JUDGEMENT CRITERIA



PROBABLE CAUSES



  • Malfunction of CAN bus line
  • Malfunction of the combination meter
  • Malfunction of the ETACS-ECU

DIAGNOSIS PROCEDURE


STEP 1. M.U.T.-III CAN bus diagnostics



Q. Is the check result normal?





STEP 2. M.U.T.-III other system diagnosis code



Q. Is the diagnosis code set?





STEP 3. M.U.T.-III other system diagnosis code




    KOS-ECU

    • Code No.U0141: ETACS CAN timeout

Q. Is the diagnosis code set?





STEP 4. Check whether the diagnosis code is reset.



(1)Erase the diagnosis code.
(2)Turn the ignition switch to "ON" position.
(3)On completion, check that the diagnosis code is not reset.

Q. Is the diagnosis code set?





STEP 5. Check whether the diagnosis code is reset.



(1)Erase the diagnosis code.
(2)Turn the ignition switch to "ON" position.
(3)On completion, check that the diagnosis code is not reset.

Q. Is the diagnosis code set?





STEP 6. Check whether the diagnosis code is reset.



(1)Erase the diagnosis code.
(2)Turn the ignition switch to "ON" position.
(3)On completion, check that the diagnosis code is not reset.

Q. Is the diagnosis code set?