|
|
(1)Since it is suspected that the security alarm has sounded accidentally, investigate whether the vehicle is under the situation below. Repair if an abnormality is found.
- The windows and sunroof are open.
- Some moving accessories are fitted in the vehicle.
- The interior equipment has been modified before a malfunction occurs.
|
|
|
(2)Set the sensitivity level of security alarm sensor to Level 4 by using the customisation function.
|
|
|
(3)Check if the security alarm siren sounds during the status of "Ready to be triggered" even though no faulty operation is made.
|
|
|
Q.
Is the check result normal?
|
|
|
The diagnosis is complete.
|
|
|
|
|
|
Check if diagnosis code is set to the ETACS-ECU.
|
|
|
Q.
Is the diagnosis code set?
|
|
|
Diagnose the ETACS-ECU. Refer to GROUP 54A, Diagnosis .
|
|
|
|
|
|
Q.
Is the check result normal?
|
|
|
Repair the connector(s) or wiring harness.
|
|
|
|
|
|
Q.
Is the check result normal?
|
|
|
Repair the connector(s) or wiring harness.
|
|
|
|
|
|
Check if the activated security alarm siren sounds even though no faulty operation is made.
|
|
|
Q.
Is the check result normal?
|
|
|
The trouble can be an intermittent malfunction (Refer to GROUP 00 - How to use Troubleshooting/inspection Service Points - How to Cope with Intermittent Malfunction ).
|
|
|
|