How to adjust the LDW camera image


caution
  • When the LDW-ECU is replaced, initialise the LDW camera before adjusting the LDW camera image.
  • Before the LDW camera image is adjusted, check the LDW camera mounted surface on the windshield for scratch, cracks, contamination or drain drops and check that the LDW-ECU is installed correctly.

How to adjust the LDW camera image



note
  • The LDW camera image cannot be adjusted under unfavourable conditions such as snowfall. In such a case, you can eliminate a warning message in the combination meter by pressing the LDW switch for at least five seconds until the conditions improve. (A diagnosis code will not be erased.)
  • To recover the display, press the LDW switch for at least five seconds again.
1.
2.
3.




4.
5.
note The ideal vehicle speed is 70 km/h or more. If you can drive the vehicle on a dry, stable and straight road at 70 km/h or more during day time, the image adjustment will be complete more quickly.


6.
7.
8.

How to reset the LDW camera image compensation value



1.
2.
3.




4.