|
If the idler LH gear bushing to idler A shaft clearance exceeds the limit, replace the
defective parts.
Standard value: 0.020 -
0.054 mm
Limit: 0.10 mm
|
|
If the idler gear bushing to idler shaft assembly clearance exceeds the limit, replace
the defective parts.
Standard value: 0.025 -
0.066 mm
Limit: 0.10 mm
|
|
|
1.Shaft to oil pump body and cover clearances.
in either case, if the measurement exceeds the specified service limit, replace oil assembly.
Standard value: 0.03 -
0.05 mm
Limit: 0.15 mm
|
|
2.Difference between gear height and oil pump body depth.
If the difference exceeds the specified service limit, replace defective part.
Standard value: 0.02 -
0.06 mm
Limit: 0.10 mm
|
|
3.Gear tooth crest to oil pump body clearance.
If clearance exceeds the specified service limit, replace defective part.
Standard value: 0.15 -
0.26 mm
Limit: 0.27 mm
|
|
Measure the clearance between rear bearing and balance shaft. If the reading exceeds the
specified limit, replace the defective parts.
Standard value: 0.070 -
0.136 mm
|