REMOVAL AND INSTALLATION


Pre-removal and Post-installation Operation
  • Air Cleaner Assembly Removal and Installation (Refer to ).
  • Under Skid Plate and Engine Room Under Cover (Front) Removal and Installation (Refer to GROUP 51 - Under Cover ).
  • Radiator Shroud Cover Removal and Installation (Refer to GROUP 14 - Radiator ).




Removal steps


1.
 Intercooler air hose A1


2.
 Intercooler air hose B


3.
 Intercooler air hose A2
<<A>>
4.
 Power steering return hose clamp and power steering return tube bracket <LHD>
<<B>>
 >>A<<
 5.
 Intercooler assembly


6.
 Deflector plate


7.
 Intercooler air pipe

REMOVAL SERVICE POINTS

<<A>> POWER STEERING RETURN HOSE CLAMP AND POWER STEERING RETURN TUBE BRACKET REMOVAL <LHD>
Remove the clamps and brackets of the power steering return hose and tube, and move the power steering return hose and tube to the position where they will not interfere with the intercooler assembly installation and removal.

<<B>> INTERCOOLER ASSEMBLY REMOVAL
1.
caution When moving the stabilizer bar to the position where it will not interfere with the intercooler removal, be careful not to damage the ball joint section of the stabilizer link.
Before removing the intercooler, remove the clamp of the stabilizer bar, and move the stabilizer bar to the position where it will not interfere with the intercooler removal. (Refer to GROUP 33 - Stabilizer Bar ).
2.After removal of the intercooler, return the stabilizer bar to the original position, and install the clamp temporarily.

INSTALLATION SERVICE POINT

>>A<< INTERCOOLER ASSEMBLY INSTALLATION
1.
caution When moving the stabilizer bar to the position where it will not interfere with the intercooler installation, be careful not to damage the ball joint section of the stabilizer link.
Before installing the intercooler, remove the clamp of the stabilizer bar, which was installed temporarily, and move the stabilizer bar to the position where it will not interfere with the intercooler installation.
2.After removal of the intercooler, return the stabilizer bar to the original position, and install the clamp. (Refer to GROUP 33 - Stabilizer Bar ).