|
1.Pull out the pin from the caliper.
2.
Remove the following parts from the caliper body.
(1)
Clip
(2)
Shim
(3)
Brake pad assembly
|
|
3.
| caution |
Keep grease or other soiling off the pad and brake disc friction surfaces.
|
Clean the piston part, and press the piston into the cylinder using the special tool piston expander (MB990520).
4.Apply the grease to the position shown of the pad.
|
|
5.Install the shim to the brake pad assembly. Then, install the brake pad assembly and clip to the brake caliper assembly.
| note |
Install at pad assembly with a wear indicator to the inside of the wheel with the indicator facing downwards.
|
6.Install the pin to the brake caliper assembly.
|
|
|
1.Remove the slide pin bolt, swivel the caliper assembly upward and retain it with a wire or similar tool.
|
|
|
2.
Remove the following parts from the caliper body.
(1)
Shim
(2)
Brake pad assembly
(3)
Clip
|
|
3.
| caution |
Keep grease or other soiling off the pad and brake disc friction surfaces.
|
Clean the piston part, and press the piston into the cylinder using the special tool piston expander (MB990520).
4.Assemble the shim, brake pad assembly and clip to the caliper support, and tighten the slide pin bolt to the specified torque.
Tightening torque: 88 ± 5 N·m
| note |
Install at pad assembly with a wear indicator to the inside of the wheel with the indicator facing downwards.
|
|
