|
|
Check that the door glass moves while contacting the door glass channel when it is raised and lowered fully. If not, adjust the door window according to the following procedures.
|
|
|
1.Remove the door trim (Refer to GROUP 52A, Door Trim  ).
|
|
|
2.Remove the waterproof film (Refer to ).
|
|
|
3.Loosen the door glass mounting screw via the adjusting hole with the door window glass fully closed, then lower the window glass a little.
|
|
4.Fully close the door window glass again and tighten the door glass mounting screw firmly via the adjusting hole.
|