|
|
1.Check that the tyre pressure is within the tyre pressure label (Refer to GROUP 31 - On-vehicle Service  ).
|
|
|
2.<Vehicles with ASC> Press the ASC OFF switch for 3 seconds or more to stop the ASC operation.
|
|
3.Set the rear wheels on the speedometer tester.
4.Chock the front wheels to prevent the sudden start of the vehicle.
|
|
5.For prevention of front wheel lateral runout, install extension fittings on rear towing hook and tie down hook, and install both ends of anchor plate.
6.Check that the speedometer indicating range is within the standard value or the needle fluctuation is within the limit.
Standard value:
Standard indicator km/h (mph)
|
Allowance range km/h (mph)
|
20 (10)
|
20.0 - 24.0 (10.0 - 12.5)
|
40 (25)
|
40.0 - 44.0 (25.0 - 27.5)
|
80 (50)
|
80.5 - 85.5 (50.3 - 53.5)
|
120 (75)
|
121.5 - 127.5 (76.0 - 80.0)
|
160 (100)
|
162.5 - 169.5 (101.5 - 106.0)
|
200 (125)
|
203.5 - 211.5 (127.2 - 132.2)
|
Limit: Needle fluctuation (Driving speed is 35 km/h (21 mph) or more) ± 3 km/h (1 mph)
|