|
1.Disconnect the sensor connector and connect the special tool test harness (MB991658) as shown.
2.Turn the ignition switch to the ON position.
3.Measure the voltage at sensor connector terminal No.2.
|
|
4.Check that voltages show the values described in the graph according to the sensor operation angle.
|
|
1.Disconnect the sensor connector and connect the special tool test harness (MB991658) as shown.
2.Turn the ignition switch to the ON position.
3.Measure the voltage at sensor connector terminal No.2.
|
|
4.Check that voltages show the values described in the graph according to the sensor operation angle.
|