Inspection Procedure 6: The FM/MW/LM Radio Broadcasting can not be Received.
| caution | Whenever the multivision display is replaced, ensure that the power supply circuit and the earthing circuit are normal. (Check that the voltage is 10 V or more.) |
COMMENTS ON TROUBLE SYMPTOM
| note | The radio wave may not be received if the vehicle is placed in the area which is exposed to a special electric field. Thus, check that the radio broadcasting can be received using the radio of another vehicle before carrying out diagnosis. |
PROBABLE CAUSES
- Malfunctions of glass antenna
- Malfunctions of antenna feeder
- Malfunctions of multivision display
DIAGNOSIS PROCEDURE |
STEP 1. Check the state of the antenna. |
Q.
Is the antenna assembled?
|
Go to Step 2. |
|
Assemble the antenna. |
|
STEP 2. Check to see if inspections are taking place is an area exposed to special electric fields. |
Q.
Is the reception area exposed to special electric fields?
|
Go to Step 3. |
|
Go to Step 4. |
|
STEP 3. Move the vehicle and check the radio. |
| Move the vehicle to a good reception area that is not exposed to special electric fields. |
Q.
Is the check result normal?
|
Diagnosis complete. |
|
Go to Step 4. |
|
STEP 4. Check if there is any damage to the glass antenna (radio amplifier), antenna fender. |
Q.
Is the check result normal?
|
Go to Step 5. |
|
Replace the quarter window glass. |
|
STEP 5. Check the connection of the antenna plug and multivision display. |
Q.
Is the antenna plug thoroughly connected to the multivision display?
|
Go to Step 6. |
|
Thoroughly connect the antenna plug and the multivision display. |
|
STEP 6. Substitute a known good multivision display, and check the trouble symptom. |
Q.
Is the check result normal?
|
Replace the multivision display. |
|
Either repair or replace the glass antenna assembly. |
|

Assemble the antenna.