| warning |
- Improper service or maintenance of any component
of the SRS and any SRS-related component, can lead to personal injury or death to service personnel
(from inadvertent firing of the air bag) or to the driver and passenger (from rendering the SRS
inoperative).
- The SRS components and seat belt with pre-tensioner should not be subjected to heat,
so remove the SRS-ECU, driver’s and front passenger’s air bag modules, clock
spring, side-airbag modules, Curtain air bag modules, front and side impact sensor and seat
belt pre-tensioner before drying or baking the vehicle after painting.
- SRS-ECU, air bag modules, clock spring, impact sensor: 93° C or more
- Seat belt with pre-tensioner 90°C or more
- Service or maintenance of any SRS component and SRS-related component must be performed
only at an authorized MITSUBISHI dealer.
- MITSUBISHI dealer personnel must thoroughly review workshop manual, and especially
its GROUP 52B - Supplemental Restraint System (SRS), before beginning any service or maintenance
of any component of the SRS and any SRS-related component.
|