|
|
- Refer to Data List Reference Table
.
- Item 118: No. 2 exhaust gas temperature sensor (catalyst
temperature)
- Item 119: No. 3 exhaust gas temperature sensor (DPF temperature)
- Item 120: Exhaust differential pressure sensor
- Item 121: Exhaust differential pressure sensor ambient air temperature sensor
|
|
|
Q.
Are the check results normal?
|
|
|
Perform the diagnosis code classified check procedure for the sensor that has
shown an abnormal data value (Refer to Inspection Chart for Diagnosis Code ).
|
|
|
|
|
|
- Item 208: Short interval DPF regeneration count
|
|
|
Q.
Is the short interval DPF regeneration counting 10 or more?
|
|
|
- Initialise the DPF-related parts, and then delete the diagnosis
code (Refer to GROUP 00 - Precautions before Service - Initialisation Procedure
for Learning Value in Diesel Particulate Filter (DPF) System
).
- Item 42: DPF system malfunction service
Carry out the forcible DPF regeneration (Refer to GROUP 17 - Diesel Particulate
Filter (DPF) System - Forcible DPF Regeneration ).
|
|
|
Q.
Is the diagnosis code P0420 or P1497 set?
|
|
|
Replace the catalytic converter. When the catalytic converter is replaced, initialise
the learning value (Refer to GROUP 00 - Precautions before Service - Initialisation
Procedure for Learning Value in Diesel Particulate Filter (DPF) System ).
On completion, carry out the forcible DPF regeneration (Refer to GROUP 17 - Diesel Particulate
Filter (DPF) System - Forcible DPF Regeneration ).
|
|
|
|
|
|
Replace the engine-ECU. When the engine-ECU is replaced, write the chassis number
(Refer to GROUP 00 - Precautions Before Service - How to Perform Chassis Number
Writing ). After replacing the engine-ECU, register the injector identification
code and learn fuel injection (Refer to GROUP 00 - Precautions Before Service - What
The Common Rail Engine Learns ). After registering the injector
identification code, carry out the forcible DPF regeneration (Refer to GROUP 17 - Diesel
Particulate Filter (DPF) System - Forcible DPF Regeneration ).
|
|
|
|
|
|
- Initialise the DPF-related parts, and then delete the diagnosis
code (Refer to GROUP 00 - Precautions before Service - Initialisation Procedure
for Learning Value in Diesel Particulate Filter (DPF) System
).
- Item 42: DPF system malfunction service
Carry out the forcible DPF regeneration 2 times (Refer to GROUP 17 - Diesel
Particulate Filter (DPF) System - Forcible DPF Regeneration ).
| note |
Carry out the DPF regeneration 2 times because the assumption of the accumulated amount
of the DPF is not stable.
|
M.U.T.-III data list
- Item 156: Soot loading by differential pressure
|
|
|
Q.
Is the check result normal?
|
|
|
Proceed to troubleshooting for black smoke (Refer to Inspection Procedure 13 ).
|
|
|
|
|
|
Replace the DPF. When the DPF is replaced, initialise the learning value (Refer
to GROUP 00 - Precautions Before Service - Initialisation Procedure For Learning
Value in Diesel Particulate Filter (DPF) System ).
|
|
|
|