DATA LIST REFERENCE TABLE


ITEM NO.
 CHECK ITEM
 INSPECTION REQUIREMENT
 NORMAL CONDITION
11
 Vehicle speed
 Idling in 1st (Vehicle stopped)
 0 km/h
Driving at a constant speed of 50 km/h
 50 km/h
12
 Front propeller shaft speed sensor
 Transfer position: 4WD
 Driving at a constant speed of 30 km/h
 30 km/h
13
 Rear propeller shaft speed sensor
 Transfer position: 4WD
 Driving at a constant speed of 30 km/h
 30 km/h
14
 Difference between front and rear propeller shaft speeds
 Transfer position: 4WD
 Driving at a constant speed of 30 km/h
 Within 0.37 km/h
15
 Acceleration
 Idling in 1st (Vehicle stopped)
 0 G
20
 Ignition voltage
 Ignition switch: ON
 System voltage
21
 Power voltage
 Ignition switch: ON
 System voltage
22
 APS
(Accelerator pedal position sensor)
  • Engine: stopped
  • Transmission gear position: Neutral position

 Accelerator pedal: Fully closed
 1.0 ± 0.05 V
Accelerator pedal: Depressed
 Gradually increases from the above value.
Accelerator pedal: Fully open
 4.0 V or more
23
 APS input
(Accelerator pedal position sensor)
 Ignition switch: ON
 CAN (CAN signal input)
24
 Engine torque
  • Engine: stopped
  • Transmission gear position: Neutral position

 Option
25
 Shift actuator current
 During transfer selection (while motor is running)
 0 A → 0.2 A to 1.5 A → 0 A
26
 Target current
 During transfer selection (while motor is running)
 0 A → 1.4 A to 1.5 A → 0 A
27
 Shift actuator voltage
  • Ignition switch: ON
  • Transmission gear position: Neutral position
  • Transfer shift lever position: 2H→4H (or 4H→4HLc, 4HLc→4LLc)

 1/2 System voltage → System voltage → 1 V or less → 1/2 System voltage

  • Ignition switch: ON
  • Transmission gear position: Neutral position
  • Transfer shift lever position: 4LLc→4HLc (or 4HLc→4H, 4H→2H)

 1/2 System voltage → 1 V or less → 1/2 System voltage
28
 Air pump motor current (rear differential lock)
  • Ignition switch: ON
  • Transfer position: 4WD
  • Rear differential lock switch: ON

 The air pump motor is activated.
 Approximately 0.3 A
The rear differential lock is kept ON.
 Approximately 0.24 A
29
 Air pump motor voltage (rear differential lock)
  • Ignition switch: ON
  • Transfer position: 4WD

 Rear differential lock switch: ON
 System voltage
Rear differential lock switch: OFF
 1 V or less
30
 Stop lamp switch
  • Ignition switch: ON
  • Engine: stopped

 Brake pedal: Depressed
 ON
Brake pedal: Released
 OFF
31
 Stop lamp switch input
 Ignition switch: ON
 CAN (CAN signal input)
40
 Transfer position
  • Engine: Idling
  • Transmission gear position: Neutral position
  • 4WD indicator lamp: Should not be flashing

 Transfer shift lever position: 2H
 2H
Transfer shift lever position: 4H
 4H
Transfer shift lever position: 4HLc
 4HL
Transfer shift lever position: 4LLc
 4LLc
41
 Transfer shift lever position
  • Ignition switch: ON
  • Engine: Stopped

 Transfer shift lever position: 2H
 2H
Transfer shift lever position: 4H
 4H
Transfer shift lever position: 4HLc
 4HL
Transfer shift lever position: 4LLc
 4LLc
60
 2WD operation detection switch
 Driving conditions: 2WD (2H)
 ON
Driving conditions: Other than the above
 OFF
61
 2WD/4WD detection switch
 Driving conditions: 2WD (2H), 4WD (4H)
 ON
Driving conditions: Other than the above
 OFF
62
 4H detection switch
 Driving conditions: 4WD (4H), 4WD (4HLc)
 ON
Driving conditions: Other than the above
 OFF
63
 Centre differential lock detection switch
 Driving conditions: 4WD (4HLc), 4WD (4LLc)
 ON
Driving conditions: Other than the above
 OFF
64
 4LLc detection switch
 Driving conditions: 4WD (4LLc)
 ON
Driving conditions: Other than the above
 OFF
65
 Transfer lever switch: 2H
 Transfer shift lever position: 2H
 ON
Transfer shift lever position: Other than the above
 OFF
66
 Transfer lever switch: 4H
 Transfer shift lever position: 4H
 ON
Transfer shift lever position: Other than the above
 OFF
67
 Transfer lever switch: 4HLc
 Transfer shift lever position: 4HLc
 ON
Transfer shift lever position: Other than the above
 OFF
68
 Transfer lever switch: 4LLc
 Transfer shift lever position: 4LLc
 ON
Transfer shift lever position: Other than the above
 OFF
71
 Rear differential lock ON switch
  • Ignition switch: ON
  • Engine: stopped

 Push the upper part of switch
 ON
Other than the above
 OFF
72
 Rear differential lock OFF switch
  • Ignition switch: ON
  • Engine: stopped

 Push the lower part of switch
 ON
Other than the above
 OFF
73
 Rear differential lock detection switch
  • Ignition switch: ON
  • Engine: stopped

 The rear differential lock is activated.
 ON
The rear differential lock is released.
 OFF
74
 Ignition switch
 Ignition switch: ON
 ON
75
 Transmission identification
 Vehicles with M/T
 M/T
Vehicles with A/T
 A/T
76
 Free-wheel solenoid valve
 During 2WD
 ON
During 4WD
 OFF
77
 Free-wheel engage switch
 During 2WD
 OFF
During 4WD
 ON
78
 FL ASTC signal
 Active traction control system is acting on FL wheel
 ON
Active traction control system is not acting on FL wheel
 OFF
79
 FR ASTC signal
 Active traction control system is acting on FR wheel
 ON
Active traction control system is not acting on FR wheel
 OFF
80
 RL ASTC signal
 Active traction control system is acting on RL wheel
 ON
Active traction control system is not acting on RL wheel
 OFF
81
 RR ASTC signal
 Active traction control system is acting on RR wheel
 ON
Active traction control system is not acting on RR wheel
 OFF
82
 Neutral switch <A/T>
 Selector lever position: N
 ON
Selector lever position: Other than the above
 OFF