Inspection Procedure 10: Does not Shift Properly (all Points)


COMMENTS ON TROUBLE SYMPTOM



PROBABLE CAUSES



  • Malfunction of output shaft speed sensor
  • Malfunction of accelerator pedal position sensor
  • Malfunction of the engine-A/T-ECU

DIAGNOSIS PROCEDURE

STEP 1. M.U.T.-III data list
Item 6: Output shaft speed sensor (Refer to data list reference table ).

Q. Is the check result normal?
Go to Step 2.
Refer to diagnosis code P1767 (P0720): Output shaft speed sensor system .

STEP 2. M.U.T.-III data list
Item 2: Accelerator pedal position sensor (Refer to data list reference table ).

Q. Is the check result normal?
Go to Step 3.
Check the accelerator pedal position sensor system (Refer to GROUP 13A - Troubleshooting, Inspection Chart For Diagnosis Code ).

STEP 3. M.U.T.-III actuator test
(1)Test drive the vehicle (Refer to Road Test, Inspection procedure 8 ).
(2)Check that the gear shifting corresponds to the standard shift line of the shift pattern diagram.

Q. Is the check result normal?
The inspection is complete.
Replace the engine-A/T-ECU.