|
Q.
Are diagnosis code P1774 (P0758) and P1776 (P0768) set?
|
|
Item 3: Second solenoid valve
|
|
OK: Operating sound can be heard.
|
|
Q.
Is the check result normal?
|
|
Intermittent malfunction (Refer to GROUP 00 - How to Cope with Intermittent Malfunction ).
|
|
|
|
Check for the contact with terminals.
|
|
Q.
Is the check result normal?
|
|
Repair the defective connector.
|
|
|
|
Disconnect the connector, and measure the resistance between terminal No.4 and No.9 at the solenoid valve side.
|
|
OK: 2.7 - 3.4 Ω (A/T fluid temperature 20°C)
|
|
Q.
Is the check result normal?
|
|
Check the second solenoid valve and solenoid valve harness.
|
|
|
|
(1)Connect A/T control solenoid valve assembly connector C-06.
|
|
(2)Turn the ignition switch to the ON position.
|
|
(3)Measure the voltage between engine-A/T-ECU connector D-218 terminal No.136 and earth. OK: 6 - 9 V
|
|
Q.
Is the check result normal?
|
|
Check for the contact with terminals.
|
|
Q.
Is the check result normal?
|
|
Repair the defective connector.
|
|
|
|
Check the output line for short and open circuit.
|
|
Q.
Is the check result normal?
|
|
Repair the wiring harness.
|
|
|
|
Item 3: Second solenoid valve
|
|
OK: Operating sound can be heard.
|
|
Q.
Is the check result normal?
|
|
Intermittent malfunction (Refer to GROUP 00 - How to Cope with Intermittent Malfunction ).
|
|
|
|
Replace the engine-A/T-ECU.
|
|
|
|
Check for the contact with terminals.
|
|
Q.
Is the check result normal?
|
|
Repair the defective connector.
|
|
|
|
Disconnect the connector, and measure the resistance between terminal No.4 and No.9 at the solenoid valve side.
|
|
OK: 2.7 - 3.4 Ω (A/T fluid temperature 20°C)
|
|
Q.
Is the check result normal?
|
|
Check the solenoid valve harness.
|
|
|
|
Check for the contact with terminals.
|
|
Q.
Is the check result normal?
|
|
Repair the defective connector.
|
|
|
|
Check the power supply line for short and open circuit.
|
|
Q.
Is the check result normal?
|
|
Repair the wiring harness.
|
|
|