|
|
- The rear suspension,
wheel and tires must be serviced to normal condition before measuring the wheel alignment.
- Measure the wheel alignment with the vehicle parked on a level surface.
|
|
|
Standard value: 0° 00’ ± 30’ (left/right difference
within 30’)
|
|
Use the compensator to measure camber.
If camber is not within the standard value, adjust by following procedures.
|
|
1.Adjust by turning the adjusting bolt of the lower arm.
Left wheel: Turning clockwise (+) camber
Right wheel: Turning clockwise (-) camber
2.After adjusting the camber, the toe-in should be adjusted.
|
|
|
Standard value:
At the centre of tyre tread: 3 ± 3 mm
Toe angle (per wheel): 0°06’ ± 0°06’
|
|
|
If toe-in is not within the standard value, adjust as follows.
|
|
|
1.Be sure to adjust the camber before making toe adjustment.
|
|
2.Adjust by turning the adjusting bolt (toe control arm mounting bolt which faces the inside
of the body).
Left wheel: Turning clockwise (+) toe-in
Right wheel: Turning clockwise (-) toe-in
|