|
|
Check that the door glass moves while contacting the door glass channel when it is raised
and lowered fully. If not, adjust the door window according to the following procedures:
|
|
|
1.Remove the door trim (Refer to GROUP 52A, Door Trim ).
|
|
|
2.Remove the waterproof film (Refer to ).
|
|
|
3.Loosen the door glass mounting screws via the adjusting holes with the door window
glass fully closed, then lower the window glass a little.
|

|
4.Fully close the door window glass again and tighten the door glass mounting screws firmly
via the adjusting holes.
|