|
|
If the sunroof motor assembly is removed or the anti-trap function is triggered at least
consecutively 5 times, perform the initialisation shown below:
|
|
|
1.Using the open switch of sunroof switch, move the sunroof lid glass to the fully opened
position.
|
|
|
2.Using the close/down switch of sunroof switch, move the sunroof lid glass
from the fully opened position to the fully tilt-up position. During that time, when the close/down
switch is pressed once, the sunroof lid glass is slid to the closing direction approximately
30 mm, and automatically stops.
|
|
|
3.When the sunroof lid glass is moved to the fully tilt-up position, press and hold
the close/down switch of the sunroof switch for 0.5 second or more.
|