REPLACEMENT OF REPLACEABLE BULB


HEADLAMP BULB (LOW-BEAM) REPLACEMENT <VEHICLES WITHOUT DISCHARGE HEADLAMP>
caution Do not touch the bulb surface with bare hands or dirty gloves. If the bulb surface (glass part) gets dirty, immediately clean it with alcohol or thinner. After drying completely, install the bulb.

1.Disconnect the connector, and twist the headlamp bulb (low-beam) to remove.
2.Replace the bulb, and connect securely the connector.

HEADLAMP BULB (HIGH-BEAM) REPLACEMENT
caution Do not touch the bulb surface with bare hands or dirty gloves. If the bulb surface (glass part) gets dirty, immediately clean it with alcohol or thinner. After drying completely, install the bulb.

1.Disconnect the connector, and twist the headlamp bulb (high-beam) to remove.
2.Replace the bulb, and connect securely the connector.

POSITION LAMP BULB REPLACEMENT

1.Disconnect the connector, and twist the position lamp socket to remove it.
2.Replace the bulb, and connect securely the connector.

FRONT TURN-SIGNAL LAMP BULB REPLACEMENT

1.Disconnect the connector, and twist the front turn-signal lamp socket to remove it.
2.Replace the bulb, and connect securely the connector.