DATA LIST REFERENCE TABLE



LIN (LIGHTING CONTROL SENSOR)


Item No.
M.U.T.-III display
Check condition
Normal condition
7001
RLS IG1
When the ignition switch is in the "LOCK" or "ACC" position
OFF
When the ignition switch is in the "ON" or "START" position
ON
7002
RLS lamp sensor sensitivity
When the customise value of the lighting control sensor sensitivity is set to level 2 (slightly quick)
Level 2 bright
When the customise value of the lighting control sensor sensitivity is set to level 3 (normal)
Level 3
When the customise value of the lighting control sensor sensitivity is set to level 4 (slightly slow)
Level 4 dark
When the customise value of the lighting control sensor sensitivity is set to level 5 (slow)
Level 5 dark
7004
RLS Radio ACC
When the ignition switch is in the "LOCK" or "START" position
OFF
When the ignition switch is in the "ACC" or "ON" position
ON
7007
RLS Vehicle speed
Perform a test run of the vehicle.
The values displayed on the speedometer and M.U.T.-III are almost the same.
7009
RLS Low beam "ON" request
When the area around the lighting control sensor is bright
OFF
When the area around the lighting control sensor is dark
ON
7010
RLS Judgment illuminance output
When the area around the lighting control sensor has become bright from dark
The value displayed on the M.U.T.-III becomes large.
When the area around the lighting control sensor has become dark from bright
The value displayed on the M.U.T.-III becomes small.
7011
RLS Tail lamp "ON" request
When the area around the lighting control sensor is bright
OFF
When the area around the lighting control sensor is dark
ON
7012
RLS Tunnel detect output
When the area around the lighting control sensor is bright
OFF
When the area around the lighting control sensor is dark
ON
7014
RLS Specification
-
EU

CAN/LIN/SWS CONVERTER (CAN CONVERTER-ECU)


Item No.
M.U.T.-III display
Check condition
Normal condition
1
Ignition SW
When the ignition switch is in the "LOCK" or "ACC" position
OFF
When the ignition switch is in the "ON" or "START" position
ON
2
Front wiper auto stop SW
When the windshield wipers are in the "rest" position
OFF
When the windshield wipers are in operation
ON
3
Ambient temperature sensor
-
In proportion to the ambient temperature, the value shown on the M.U.T.-III varies.
4
Rain sensor function
When the rain sensitive wiper function has been enabled
Enable
When the rain sensitive wiper function has been disabled
Disable
5
RHD/LHD changeover SW
LH drive vehicle
LHD
RH drive vehicle
RHD
6
Security alarm sensor setting
Short wheelbase <Vehicles without sunroof>
Type 9
Short wheelbase <Vehicles with sunroof>
Type 10
Long wheelbase <Vehicles without sunroof>
Type 11
Long wheelbase <Vehicles with sunroof>
Type 12
7
Equipment information
Vehicles with lighting control sensor
RLS
Vehicles with security alarm sensor
Security alarm
Vehicles with lighting control sensor and security alarm sensor
RLS and security