|
|
In compass setting, when the compass azimuth display is abnormal, the display can be repaired by performing the following operations.
|
|
|
- Declination calibration: Check that the declination calibrated value is the same as the one for the area that vehicle is in now.
- Compass calibration: Overwrites the compass azimuth circle.
|
|
|
1.With the information screen (average fuel consumption, audio screen, etc.) of centre display being displayed, press the [ADJ] button three times.
|
|
2.When the "COMPASS VARIANCE" screen is displayed, press the [SELECT] button.
|
|
3.The declination calibrated value currently set is indicated.
| note |
If "11° EAST" is indicated, it means that the calculated value of compass is calibrated from north to east by 11° to be displayed on the centre display.
|
The initial value of declination calibration is set to 0°.
|
|
4.Referring to the value on the declination calibration map, adjust the declination calibrated value by pressing the [←] button and the [→] button, so that the value becomes nearest to the value for the area that the vehicle is in now.
| note |
The declination calibrated value can be set between 28°WEST and 28°EAST at 1°intervals.
|
5.After the declination calibrated value is adjusted, press the [SET] button. The screen flashes twice and the value is stored.
|
|
6.Press the [BACK] button to return to the [COMPASS VARIANCE] screen.
7.Press the [←] button or the [→] button.
|
|
8.When the "COMPASS CALIBRATION" screen is displayed, press the [SELECT] button.
|
|
9.When "CALIBRATION READY?" is indicated, press the [SELECT] button.
|
|
10.When "PLEASE DRIVE SLOWLY IN A SAFE, OPEN AREA" is indicated, turn the vehicle 360° in a safe and open area.
|
|
11."COMPLETE" is indicated with a blip, and the compass calibration is completed. When three seconds have elapsed after completion, the information screen is displayed.
|