Inspection Procedure 5: "-" is displayed on the ambient temperature display.



caution Whenever the centre display unit is replaced, ensure that the communication circuit is normal.








COMMENTS ON TROUBLE SYMPTOM




PROBABLE CAUSES



  • Malfunction of A/C-ECU
  • Damaged wiring harness and connectors

DIAGNOSIS PROCEDURE


STEP 1. Connector check: D-08 A/C-ECU connector, D-106 centre display unit connector


Q. Is the check result normal?

Go to Step 2.
Repair the defective connector.

STEP 2. Check the wiring harness between D-08 A/C-ECU connector terminal No.32 and D-106 centre display unit connector terminal No.11.



  • Check the communication line open circuit and short circuit.

Q. Is the check result normal?

Go to Step 3.
Repair the wiring harness.

STEP 3. Retest the system


Confirm that the A/C-ECU operation screen is displayed normally.

Q. Is the check result satisfactory?

The procedure is complete.
Go to step 1.