TROUBLE SYMPTOM CHART

caution

During diagnosis, a diagnosis code associated with other system may be set when the ignition switch is turned on with connector(s) disconnected. On completion, confirm all systems for diagnosis code(s). If diagnosis code(s) are set, erase them all.

Trouble symptom	Inspection procedure number	Reference page
M.U.T.-III cannot communicate with WCM.	1	The procedure is the same as that for 10 MY OUTLANDER.
The ignition key cannot be registered using M.U.T.-III.	2
Engine does not start.	3
Abnormally of the WCM power supply and earth circuits.	4
Keyless entry system does not work.	5	The procedure is the same as that for 10 MY OUTLANDER.
Keyless entry hazard answerback function does not work normally.	6	The procedure is the same as that for 10 MY OUTLANDER.
The timer lock function does not work after the doors have been unlocked by the keyless entry system.	7
Multimode keyless entry system function does not work at all.	8
Power door locks with selective unlocking do not work.	9	The procedure is the same as that for 10 MY OUTLANDER.