REMOVAL AND INSTALLATION


caution When the specified alternator is not used, each ECU would probably fail.
Pre-removal Operation
  • Air Cleaner Assembly Removal (Refer to GROUP 15 - Air Cleaner ).
  • Intercooler Inlet Air Hose Removal (Refer to GROUP 15 - Intercooler ) <Except Euro5b>.
  • Intercooler Inlet Air Hose Removal (Refer to GROUP 15 - Intercooler ) <Euro5b>.
  • A/C Compressor Drive Belt, Alternator and Power Steering Oil Pump Drive Belt Removal (Refer to GROUP 11A - Crankshaft Pulley ).

 Post-installation Operation
  • A/C Compressor Drive Belt, Alternator and Power Steering Oil Pump Drive Belt Installation (Refer to GROUP 11A - Crankshaft Pulley ).
  • Intercooler Inlet Air Hose Installation (Refer to GROUP 15 - Intercooler ) <Except Euro5b>.
  • Intercooler Inlet Air Hose Installation (Refer to GROUP 15 - Intercooler ) <Euro5b>.
  • Air Cleaner Assembly Installation (Refer to GROUP 15 - Air Cleaner ).
  • Alternator and Power Steering Oil Pump Drive Belt Tension Check (Refer to GROUP 11A - On-vehicle Service, Alternator and Power Steering Oil Pump Drive Belt Tension Check ).
  • A/C Compressor Drive Belt Tension Check and Adjustment (Refer to GROUP 11A - On-vehicle Service, A/C Compressor Drive Belt Tension Check and Adjustment ).




Removal steps


1.
 Alternator connector connection


2.
 Alternator terminal connection
<<A>>
3.
 Alternator assembly

REMOVAL SERVICE POINT

<<A>> ALTERNATOR ASSEMBLY REMOVAL

1.Remove the rubber shield from the wheelhouse (RH), and put the pipe, hose, etc. to side so that they will not be a hindrance when removing and installing the alternator assembly.
2.Remove the alternator assembly from the wheelhouse (RH).