REMOVAL AND INSTALLATION <4WD>


Pre-removal and Post-installation Operations
  • Transmission Control Lever Assembly and Transfer Control Lever Assembly Removal and Installation (Refer to ).
  • Transmission Oil Draining and Refilling (Refer to ).
  • Transfer Oil Draining and Refilling (Refer to ).
  • Under Skid Plate and Engine Room Under Cover Removal and Installation (Refer to GROUP 51 - Under Cover ).
  • Front and Rear Propeller Shaft Removal and Installation (Refer to GROUP 25 ).
  • Front Exhaust Pipe Removal and Installation (Refer to GROUP 15 - Front Exhaust Pipe and Main Muffler .)
  • Clutch Release Cylinder Assembly and Clutch Damper Assembly Removal and Installation (Disconnect the connection with transmission only and do not disconnect the clutch line.) (Refer to GROUP 21A - Clutch Release Cylinder Assembly ).
  • Starter Assembly Removal and Installation (Refer to GROUP 16 - Starter Motor Assembly ).
  • Transfer Mount Bracket Assembly Removal and Installation (Refer to GROUP 32 - Transfer Mounting ).
  • No.2 Crossmember Assembly and Transmission Mount Insulator Assembly Removal and Installation (Refer to GROUP 32 - Rear Engine Mounting ).




Removal steps


1.
 Transmission harness connector connection


·
 Support the transmission with a transmission jack


2.
 Bell housing cover


3.
 Transmission assembly lower part coupling bolts


4.
 Front exhaust pipe bracket


5.
 Transmission assembly upper part coupling bolts


6.
 Transmission assembly