CODING LIST


caution With the ETACS functions being customised, if any of the ETACS-ECU variant coding and option coding items are changed, the customised contents are reset. In such case, the functions need to be recustomised.

VARIANT CODING






note For details on how to use the M.U.T.-III, refer to the "M.U.T.-III operation manual."
1.
2.
3.
4.
5.
6.
note When the V.C.I. is energized, the V.C.I. indicator lamp will be illuminated in a green colour.
7.
8.
9.
10.
11.*
note *: It is impossible to disassemble the TC-SST-ECU. Replace the transmission assembly as a unit.

ENGINE-ECU CODING DATA LIST


note The items to be displayed may differ depending on the version of the M.U.T.-III.

<4A9, 4B1>
Item name
 Initial value
Final gear ratio
5MT/6MT <M/T>
6.120 <CVT>
4.625 <A/T>
4.062 <TC-SST>
Tyre circumference
 2015mm
IMMOBILIZER
 Present
ABS
 Not present <Vehicles with ASC>
Present <Vehicles without ASC>
A.S.C.
 Not present <Vehicles without ASC>
Present <Vehicles with ASC>
S/W variation
 No.1

<BWC>
Item name
 Initial value
Dataset
 ABS (LANCER) or ASC (LANCER)
Cruise control
 Not present or present

TC-SST-ECU coding data list


note The items to be displayed may differ depending on the version of the M.U.T.-III.
Item name
 Initial value
Vehicle line
 LANCER
Destination
 EUR
Tyre size
 215/45R18
Cruise control
 Present
A.S.C.
 Present
Turbo charger
 T/C(INCONEL-AL)

ETACS-ECU CODING DATA LIST


note The items to be displayed may differ depending on the version of the M.U.T.-III.
Item name
 Initial value
Vehicle line
 LANCER H/B
Model year
 (Displays the model year)
SST oil cooling fan
 Not present
Destination
 EUR
Transmission
 5MT <5M/T>
6MT <6M/T>
CVT <CVT>
4AT <A/T>
TC-SST <TC-SST>
Engine type
 1.5L D4 MPI VVT <4A9>
1.8L D4 MPI VVT <4B10>
2.0L D4 VVT T/C <4B11-T/C>
BSY or BWC <BWC>
Engine power
 Normal <4A9, 4B10, 4B11-T/C>
High power <BWC>
Handle side
 LHD or RHD
Chassis type for A.S.C.
 Type 1 or Type 2 or Type 3 or Type 4 or Type 5 <Except RALLIART>
Type 7 <RALLIART>
Final drive
 Front Drive <Except RALLIART>
4WD FF Base <RALLIART>
Transfer
 2WD <Except RALLIART>
ACD <RALLIART>
IG off delay control
 Disabled <Except RALLIART>
Enable <RALLIART>
Tyre size
 -
Tyre circumference
 2015mm
Fuel tank
 Not used
DRL*1 type
 Normal DRL
Smart entry system
 Not present or Type B
TPMS*1
 Not present
Keyless entry*2
 Not present or Present
Airbag auto hazard
 Not present
Immobilizer
 Type A
Cruise control
 Not present or Present
Corner sensor
 Not present
Head lamp auto levelling device
 Not present or Present
Oil level warning
 Not present
Water separate warning
 Not present
Speed meter scale
 Not used
Idle neutral control
 Not used
ENG-CVT unit control
 Not used
INVECS control
 Not used
Lock-up slip control
 Not used
Side air bag
 Not present or Present
ACC power auto cut
 Default enabled
Number of speaker*2
 Premium or 6 speakers or 4 speakers
Seat material*2
 Fabric or Leather
Auto lamp control
 No/Chg Ng or Hi RLS/chg Ng
Front differential
 Open <Except RALLIART>
Helical <RALLIART>
Rear differential
 Undefined <Except RALLIART>
LOM <RALLIART>
Power window type
 Type P1
Sunroof type
 Not present or Type S1
WCM
 Present
OCM
 Not present
ORC
 Present
A/C
 Present
AUDIO*2
 Not present or Present
AND*2
 Not present or Present
VES
 Not used
DISP
 Not used
NAVI
 Not used
CAMERA
 Not present
TUNER
 Not used
Electric Slide door (Left)
 Not present
Electric Slide door (Right)
 Not present
ETG
 Not present
MSMD
 Not used
HFM
 Not present or Present
Confort washer customize
 Enabled(def.E)
Head Lamp Leveling system type
 Type 1/No present
ABS
 Not present or Present
A.S.C.
 Not present or Present
SAS
 Not present or Present
4WD
 Not present
TCM
 Not present <M/T>
Present <A/T, CVT, TC-SST>
ACTV_STB
 Not used
Pre-Crush
 Not used
EPS
 Not present or Present
ACDAYC
 Not present <Except RALLIART>
Present <RALLIART>
Indirect lamp
 Not present
Power window Dr
 Present
Power window As
 Present
Power window RR
 Present
Power window RL
 Present
Power window BK
 Not used
Sunroof
 Not present or Present
RLS*2
 Not present or Present
Washer function improvement
 Enable
IG key illumination
 W/o getting off or W/ getting off
Turn signal bulb
 21W+21W+5W
Rear wiper
 Disabled
Fold mirror
 Disabled or Enable
Head lamp
 4 beams
Comfort Hazard
 Disabled
Head lamp washer
 Disabled or Popup 1 w/ washer
Front fog lamp mode
 B spec.
Front fog lamp*2
 Not present or Present
Rear fog lamp
 Present/Chg Ng
Room lamp delay timer/door and H/L
 Short
Room lamp by H/L
 Disabled or Full
Gate/Trunk lamp
 Mode-2 (cargo)
Head lamp auto cut mode
 B-spec
Head lamp auto cut
 Enable
Door lock system
 B-spec/exceptUSH, C-spec/exceptUSL or D-spec/dead lock
Auto door lock/unlock
 Disabled
Key reminder unlock
 Disabled
Horn type*2
 Dual horn
Gate/trunk opener mode
 Present(Type 1)
Cooling fan
 Relay control
Security alarm mode
 Not present
Security alarm function
 NotPresent/Chg Ng
Pre-alarm
 Not present
Multi mode RKE
 Disabled or Enable
Gate/Trunk
 Gate type
Manner switch
 Not present/Chg Ng
Remote engine starter
 Not present/Chg Ng
Panic Alarm
 Disabled
Room lamp improvement
 Enable
Front wiper
 Speed Sensitive or Rain Sensitive
Comfort flasher type
 Present/Chg OK
Room lamp centre switch
 Not present
Wiper washer check bulb*2
 Present
AUDIO/S.RADIO type
 AM MW/LW or Other
H/L levelling type
 Not present or Com less/static
AFS*1/ACL type
 Not present or Fix bending lamp
ESS
 Present
Compressor type*2
 No compressor or Scroll 60 cc or Scroll 90 cc
Temperature type
 Celsius
Rear view camera
 Not present
Nose view camera
 Not present
Side view camera
 Not present
Average speed
 Available
Vehicle language status
 English
Fuel amount
 Not used
Fuel consumption scale
 L/100km or MPG (UK)
Speed gauge tolerance
 Japan/EUR
Coolant temp gauge threshold
 Normal
Frost warning threshold
 EUR
Distance to empty
 Available
Average fuel consumption
 Available
Instant fuel consumption
 Available
Time travelled
 Not available
Distance travelled
 Not available
Fuel used
 Not available
Trip autoreset IG OFF
 Available
Variable speed alarm
 Not available
Rest reminder
 Available
Instant speed
 Not available
Seat belt reminder control type
 Non AABT
Seat belt reminder flashing
 Available
Seat belt reminder indicator
 D and P independent
Reverse alarm
 Not available
Key reminder
 Not available
Lighting monitor
 Available
GCC speed alarm
 Not available
Condition buzzer
 Not available
Rent-a-car mode IG-OFF always
 Available
Rent-a-car mode IG-OFF door open
 Available
Service reminder schedule table
 EU 10 <Except RALLIART>
Optional <RALLIART>
ACD control display
 Not used
TPMS information
 N/A
Horn chirp by keyless
 NotPresent/Chg Ng
Rear S/R unlock output
 Not present
Trailer turn detection
 Present
Shift Lever
 Not present <Except RALLIART>
Present <RALLIART>
AFS/ACL
 Not present or Present
Satellite radio*2
 Not present
Fuel tank type
 Not used
KOS auto lock customize
 Not used
DRL function*2
 NotPresent/Chg Ok or Present/Chg Ok
FACU
 Not present
S-AWC control display
 Not available
Diesel particulate filter
 Not present or Present
Language mode
 Not available or Available
WSS
 Not present
Door Unlock Mode Customize
 Disabled
RLS overwipe type
 Type 1
RLS WS type
 Type 2 (Green)
note
  • *1: TPMS is an abbreviation of Tyre Pressure Monitoring System, DRL of Daytime Running lamp, AFS of Adaptive Front lighting System, and ARS of Advanced Rear lighting System. However, the systems are not used for this vehicle.
  • *2: The setting can be changed by the option coding.

OPTION CODING


caution
  • If there is any item indicated by the option coding after equipment change, set ETACS-ECU so that the option coding data corresponds with the equipment content. Pay attention to that the concerned functions and systems do not work normally if the setting does not correspond with the equipment.
  • With the ETACS functions being customised, if any of the ETACS-ECU option coding items are changed, the customised contents are reset. In such case, the functions need to be recustomised.


  • How to check option coding data

  1. Connect the M.U.T.-III.
  2. Select "ETACS" on the system selection screen.
  3. Select "Coding."
  4. Select "Option Coding Information."
  5. Check the displayed option coding information.

  • How to change option coding data

  1. Connect the M.U.T.-III. Refer to .
  2. Select "ETACS" on the system selection screen.
  3. Select "Coding."
  4. Select "Option Coding."
  5. Change to correct option coding data.

LIST
Item name
Number of speaker
Seat material
AUDIO (CAN)
AND
HFM (Hands free-ECU)
Rain light sensor
Front fog lamp
Horn type
Wiper washer check bulb
Compressor type
Satellite radio
DRL function
Keyless