Inspection Procedure 5: Hunting (Repeated Acceleration and Deceleration) Occurs at the Set Vehicle Speed.




COMMENTS ON TROUBLE SYMPTOM



  • The wheel speed sensor signal (vehicle speed signal) or the diesel fuel system is suspected.
  • The wheel speed sensor signal (vehicle speed signal) is transmitted from the ABS-ECU <vehicles without ASC> or ASC-ECU <vehicles with ASC> to the engine-ECU via the CAN bus line.

PROBABLE CAUSES



  • Malfunction of CAN bus system.
  • Malfunction of the ABS system <vehicles without ASC>.
  • Malfunction of the ASC system <vehicles with ASC>.
  • Malfunction of the diesel fuel system.
  • Malfunction of the engine-ECU.

DIAGNOSIS PROCEDURE


caution
  • If there is any problem in the CAN bus lines, an incorrect diagnosis code may be set. Prior to this diagnosis, diagnose the CAN bus lines.
  • Before replacing the ECU, ensure that the CAN bus lines is normal.

STEP 1. Check the CAN bus system diagnosis.


Using M.U.T.-III, perform CAN bus diagnosis (Refer to GROUP 54C - Explanation About The M.U.T-III Can Bus Diagnostics ).

Q. Is the check result satisfactory?

Go to Step 2 <Vehicles without ASC>.
Go to Step 3 <Vehicles with ASC>.
Repair the CAN bus lines (Refer to GROUP 54C - Troubleshooting, Can Bus Diagnostic Table ). Then go to Step 7.

STEP 2. Check the ABS system diagnosis code <vehicles without ASC>.


Using M.U.T.-III, perform ABS system diagnosis code (Refer to GROUP 35B - Troubleshooting, Diagnosis Function ).

Q. Is any diagnosis code set?

Repair the ABS system (Refer to GROUP 35B - Troubleshooting, Diagnosis Code Chart ). Then go to Step 7.
Go to Step 4.

STEP 3. Check the ASC system diagnosis <vehicles with ASC> code.


Using M.U.T.-III, perform ASC system diagnosis code (Refer to GROUP 35C - Troubleshooting, Diagnosis Function ).

Q. Is any diagnosis code set?

Repair the ASC system (Refer to GROUP 35C - Troubleshooting, Diagnosis Code Chart ). Then go to Step 7.
Go to Step 4.

STEP 4. Check the diesel fuel system diagnosis code.


Using M.U.T.-III, perform diesel fuel system diagnosis code (Refer to GROUP 13D - Troubleshooting, Diagnosis Function ).

Q. Is any diagnosis code set?

Repair the diesel fuel system (Refer to GROUP 13D - Troubleshooting, Inspection Chart for Diagnosis Trouble Code ). Then go to Step 7.
Go to Step 5.

STEP 5. Check the data list.


Using M.U.T.-III, check the data list (Refer to - data list reference table).

  • Item 52: Vehicle speed signal

Q. Is the check result normal?

Go to Step 6.
Replace the engine-ECU (Refer to GROUP 13D - Engine-ECU ). When the Engine-ECU is replaced, register the encrypted code (Refer to GROUP 42C - Troubleshooting, ID Code Registration Necessity Judgment Table ). Then go to Step 7.

STEP 6. Retest the system


Q. Does a hunting occur?

Replace the engine-ECU (Refer to GROUP 13D - Engine-ECU ). When the Engine-ECU is replaced, register the encrypted code (Refer to GROUP 42C - Troubleshooting, ID Code Registration Necessity Judgment Table ). Then go to Step 7.
It can be assumed that this malfunction is intermittent (Refer to GROUP 00 - How to Use Troubleshooting/Inspection Service Points, How to Cope with Intermittent Malfunction ).

STEP 7. Retest the system


Q. Does a hunting occur?

Return to Step 1.
The procedure is complete.