|
|
1.Perform the following checks.
Inspection procedure
|
Check conditions
|
Items to be checked (Normal status)
|
1
|
Brake pedal: Depressed
|
Ignition switch position: LOCK (OFF) or ACC
|
The shift lever cannot be moved out of the P position.
|
2
|
Ignition switch position: ON
|
The shift lever can be moved from the P position to other positions smoothly.
|
3
|
Selector lever position: Other than P
|
The ignition switch cannot be turned to the LOCK (OFF) position.
|
4
|
Selector lever position: P
|
The ignition switch can be turned to the LOCK (OFF) position smoothly.
|
|
|
2.If there is a problem with above operations, install the key interlock cable according to the procedure below. (Automatic adjustment)
(1)
Disconnect the key interlock cable connection (shift lever side). (Refer to  .)
(2)
|
|
| caution |
Leave the ignition switch in the LOCK (OFF) position until the key interlock cable installation is completed.
|
|
Move the shift lever to the P position, and turn the ignition switch to the LOCK (OFF) position.
(3)
Install the tip of key interlock cable to the lock cam of shift lever assembly, using a caution not to twist the inner cable.
(4)
Install the adjuster case with its lock guide pulled up (unlocked).
(5)
Firmly push down the lock guide to lock it.
|
|
| note |
The lock position of the key interlock cable is automatically adjusted by a spring.
|
|
|