Code No.U0103: Shift Lever Time-out Error


caution
  • If there is any problem in the CAN bus lines, an incorrect diagnosis code may be set. Prior to this diagnosis, diagnose the CAN bus lines.
  • Whenever the ECU is replaced, ensure that the CAN bus lines are normal.

DIAGNOSIS CODE SET CONDITIONS



PROBABLE CAUSES



  • The CAN bus line is defective.
  • Malfunction of the shift lever-ECU
  • Malfunction of TC-SST-ECU

DIAGNOSIS PROCEDURE

STEP 1. M.U.T.-III CAN bus diagnostics.
Use M.U.T.-III to perform the CAN bus diagnosis.

Q. Is the check result normal?
Go to Step 2.
Repair the CAN bus lines. (Refer to GROUP 54C - Troubleshooting .) After repairing the CAN bus line, go to Step 2.

STEP 2. M.U.T.-III diagnosis code.
Check the shift lever diagnosis code. (Refer to .)

Q. Is the diagnosis code set?
Perform the relevant troubleshooting.
Go to Step 3.

STEP 3. Check whether the diagnosis code is reset.

Q. Is diagnosis code No.U0103 set?
Replace the TC-SST assembly. (Refer to .)
Intermittent malfunction. (Refer to GROUP 00 - How to Cope with Intermittent Malfunction .)