REMOVAL AND INSTALLATION <4A9>


Pre-removal Operation
  • Radiator Condenser Tank Removal (Refer to GROUP 14 - Radiator ).
  • Engine Room Under Cover Front B and Engine Room Side Cover (RH) Removal (Refer to GROUP 51 - Under Cover ).

 Post-installation Operation
  • Engine Room Under Cover Front B and Engine Room Side Cover (RH) Installation (Refer to GROUP 51 - Under Cover ).
  • Radiator Condenser Tank Installation (Refer to GROUP 14 - Radiator ).





Removal steps


1.
 Earth combination
<<A>>
2.
 Engine mounting bracket

>>A<<
 3.
 Engine mounting insulator stopper


4.
 Engine mounting insulator

REMOVAL SERVICE POINT

<<A>> ENGINE MOUNTING BRACKET REMOVAL
1.
caution When supporting the engine and transmission assembly with a garage jack, be careful not to deform the engine oil pan.
Place a garage jack against the engine oil pan with a piece of wood in between to support the engine and transmission assembly.
2.Operate a garage jack so that the engine weight is not applied to the engine mounting insulator, and remove the engine mounting insulator.

INSTALLATION SERVICE POINT

>>A<< ENGINE MOUNTING INSULATOR STOPPER INSTALLATION

Install the engine mounting insulator stopper as shown in the figure.