Code No. P0328: Right Bank Detonation Sensor Circuit High Input








OPERATION



  • The sensor signal is input to the engine-ECU (terminal No. 28) from the right bank detonation sensor (terminal No. 1).
  • The power voltage is earthed to the engine-ECU (terminal No. 29) from the right bank detonation sensor (terminal No. 2).

FUNCTION



  • The detonation sensor detects the vibration of the cylinder block caused by detonation waves, and inputs a signal to the engine-ECU.
  • In response to the signal, the engine-ECU provides controls to retard the ignition timing when the detonation occurs.

TROUBLE JUDGMENT


Check Condition
  • 2 seconds or more have passed since the engine starting sequence was completed.
Judgment Criterion
  • Right bank detonation sensor output voltage has continued to be higher than 2.25 V for 2 seconds.

PROBABLE CAUSES



  • Short circuit in right bank detonation sensor circuit or loose connector contact
  • Failed engine-ECU

DIAGNOSIS PROCEDURE

STEP 1. Connector check: B-37 right bank detonation sensor connector

Q. Is the check result normal?
Go to Step 2 .
Repair or replace the connector.

STEP 2. Connector check: B-29 engine-ECU connector

Q. Is the check result normal?
Go to Step 3 .
Repair or replace the connector.

STEP 3. Check harness between B-37 (terminal No. 1) right bank detonation sensor connector and B-29 (terminal No. 28) engine-ECU connector.

  • Check output line for short circuit.

Q. Is the check result normal?
Go to Step 4 .
Repair the damaged harness wire.

STEP 4. M.U.T.-III diagnosis code

  • Reconfirmation of diagnosis code.

Q. Is diagnosis code set?
Replace the engine-ECU.
Intermittent malfunction (Refer to GROUP 00 - How to Use Troubleshooting/Inspection Service Points - How to Cope with Intermittent Malfunctions ).