|
|
- The G sensor is incorporated in the ABS-ECU.
|
|
|
This diagnosis code is set when the abnormality is detected by comparing the G sensor value output from the G sensor with the value output from the wheel speed sensor.
|
|
|
- Improper installation of the G sensor
- Malfunction of wheel speed sensor
- ABS-ECU malfunction
- External noise interference
- When the vehicle is driven on a drum roller
|
|
|
Use M.U.T.-III to diagnose the CAN bus lines.
|
|
|
Q.
Is the check result normal?
|
|
|
Repair the CAN bus lines (Refer to GROUP 54C - CAN Bus Diagnosis table ). On completion, go to Step 2.
|
|
|
|
|
|
Q.
Is the diagnosis code No. C1242 set?
|
|
|
The procedure is complete.
|
|
|
|
|
|
Use the M.U.T.-III to check whether the wheel speed sensor-related diagnosis code is set or not.
|
|
|
Q.
Is any diagnosis code set?
|
|
|
Troubleshoot for the relevant diagnosis code (Refer to ).
|
|
|
|
|
|
Check the following service data (Refer to ).
|
|
|
Q.
Is the check result normal?
|
|
|
Replace the ABS-ECU (Refer to ), and then go to Step 6.
|
|
|
|
|
|
Q.
Is the diagnosis code No. C1242 set?
|
|
|
Replace the ABS-ECU (Refer to ).
|
|
|
|
|
|
Intermittent malfunction (Refer to GROUP 00 - How to Cope with Intermittent Malfunction ).
|
|
|
|
|
|
Q.
Is the diagnosis code No. C1242 set?
|
|
|
The procedure is complete.
|
|
|
|