Code No. P0607: Engine-ECU (sub CPU) Malfunction


FUNCTION



  • The main microcomputer detects errors in the sub microcomputer used for monitoring.

TROUBLE JUDGMENT


Check Conditions
  • 2 seconds later after the ignition switch has been in "ON" position or the engine has started up.
  • Battery positive voltage is 10 V or more
Judgment Criterion
  • The main microcomputer detects a monitoring microcomputer error.

PROBABLE CAUSE



  • Failed engine-ECU

DIAGNOSIS PROCEDURE

STEP 1. M.U.T.-III diagnosis code

  • After erasing the diagnosis code through M.U.T.-III, ignition switch is "ON" position and confirm whether the diagnosis code is output.

Q. Is the diagnosis code set?
Replace the engine-ECU. When the engine-ECU is replaced, write the chassis number (Refer to GROUP 00 - Precautions Before Service - How to Perform Chassis Number Writing ). After replacing the engine-ECU, register the injector identification code and learn fuel injection (Refer to GROUP 00 - Precautions Before Service - What The Common Rail Engine Learns ). After registering the injector identification code, the vehicle equipped with the closed type DPF carries out the forcible DPF regeneration. (Refer to GROUP 17 - Diesel Particulate Filter (DPF) System - Forcible DPF Regeneration ).
Intermittent malfunction (Refer to GROUP 00 - How to Use Troubleshooting/Inspection Service Points - How to Cope with Intermittent Malfunctions ).