|
Turn the ignition switch to the ACC position, and then pull the key interlock cable out from the ignition key cylinder.
|
|
1.Selector lever to P position.
|
|
2.Turn the ignition key to LOCK (OFF) position.
|
|
3.Install the tip of the key interlock cable to the lock cam of the selector lever assembly taking care not to twist the inner cable. 4.Lift the lock guide (unlocked position) and then install the adjuster case. 5.While pulling the inner cable toward the direction B, firmly push down the lock guide to lock the case.
note |
The lock position of the key interlock cable is automatically adjusted by a spring.
|
|