Inspection Procedure 5: The Rear Display not displays the Navigation System Picture.
| caution | Whenever the rear display unit is replaced, ensure that the communication circuit is normal. |






DIAGNOSIS PROCEDURE |
STEP 1. Check the MMCS navigation screen. |
| Check whether the MMCS navigation screen is displayed normally. |
Q.
Is the check result normal?
|
Go to Step 2. |
|
Diagnose the MMCS. Refer to . |
|
STEP 2. Check the communication and wire connection in the MMCS service mode. |
Perform "Network/Connect Line Check" in the MMCS service mode to check that the communication and wire connection with the rear display unit* are OK. Refer to . |
|
Q.
Is the check result normal?
|
Go to Step 3. |
|
Go to Step 5. |
|
STEP 3. Connector check: E-130 rear display unit connector, D-207 audio visual navigation unit connector |
Q.
Is the check result normal?
|
Go to Step 4. |
|
Repair the defective connector. |
|
STEP 4. Check the wiring harness between E-130 rear display unit connector terminal Nos.35 and D-207 audio visual navigation unit connector terminal Nos.32. |
|
|
Q.
Is the check result normal?
|
Go to Step 5. |
|
Repair the wiring harness. |
|
STEP 5. Connector check: E-129 rear display unit connector, D-210 audio visual navigation unit connector |
Q.
Is the check result normal?
|
Go to Step 6. |
|
Repair the defective connector. |
|
STEP 6. Check the wiring harness between E-129 rear display unit connector terminal No.14 and D-210 audio visual navigation unit connector terminal No.6. |
|
|
Q.
Is the check result normal?
|
Go to Step 7. |
|
Repair the wiring harness. |
|
STEP 7. Substitute a known good rear display unit, and check the trouble symptom. |
| Check whether image sent from the MMCS is displayed on the rear display unit normally. |
Q.
Is the check result normal?
|
Replace the rear display unit. |
|
Replace the audio visual navigation unit. |
|

Diagnose the MMCS. Refer to 