REMOVAL AND INSTALLATION


caution Do not apply grease or lubricant to the switch and the switch installation section to avoid malfunction of the switch. In addition, do not use gloves which have grease on them.
Post-installation Operation
  • Clutch Pedal Adjustment (Refer to ).




Removal steps


·
 Driver side lower cover (Refer to GROUP 52A - Instrument Panel Assembly )


1.
 Clutch arm stopper stay

>>A<<
 2.
 Clutch switch <Vehicle with cruise control>


3.
 Bushing


4.
 Snap pin


5.
 Clevis pin


6.
 Clutch master cylinder mounting nut


7.
 Master cylinder member mounting bolt


8.
 Turnover spring


9.
 Bushing


10.
 Pedal stopper


11.
 Pedal pad


12.
 Clutch pedal assembly

INSTALLATION SERVICE POINT

>>A<< CLUTCH SWITCH INSTALLATION <VEHICLES WITH CRUISE CONTROL>

Install the clutch switch so that the clearance between the stopper and switch is as shown when the clutch pedal is not depressed.