Code No.P1779 (P0731) [1st], P1780 (P0732) [2nd], P1781 (P0733) [3rd], P1782 (P0734) [4th], P1783 (P0735) [5th], P1784 (P0736) [reverse]: Gear incorrect ratio


OPERATION



DIAGNOSIS CODE SET CONDITIONS




PROBABLE CAUSES



  • Malfunction of input shaft speed sensor
  • Malfunction of output shaft speed sensor
  • Damaged harness wires and connectors
  • Malfunction of the engine-A/T-ECU
  • Malfunction of solenoid valve
  • Malfunction of reverse clutch retainer
  • Malfunction of valve body
  • Malfunction of direct planetary carrier
  • Malfunction of low-reverse brake system (for diagnosis codes P1779, P1784)
  • Malfunction of underdrive clutch system (for diagnosis codes P1779, P1780, P1781, P1782)
  • Malfunction of second brake system (for diagnosis codes P1780, P1783)
  • Malfunction of overdrive clutch system (for diagnosis codes P1781, P1782, P1783)
  • Malfunction of reverse clutch system (for diagnosis code P1784)
  • Malfunction of direct clutch system (for diagnosis codes P1782, P1783)
  • Malfunction of reduction brake system (for diagnosis codes P1779, P1780, P1781, P1784)
  • Malfunction of one-way clutch system (for diagnosis code P1779)

DIAGNOSIS PROCEDURE

STEP 1. M.U.T.-III diagnosis code
Either of diagnosis codes P1779, P1780, P1781, P1782, P1783 or P1784 is set, the input shaft speed sensor or output shaft speed sensor is defective.

Q. Are diagnosis codes P1766 (P0715) or P1767 (P0720) output?
YES diagnosis code P1766 (P0715) is set : Refer to diagnosis code P1766 (P0715) input shaft speed sensor system .
YES diagnosis code P1767 (P0720) is set : Refer to diagnosis code P1767 (P0720) output shaft speed sensor system .
Go to Step 2.

STEP 2. M.U.T.-III diagnosis code
Either of diagnosis codes P1779, P1780, P1781, P1782, P1783 or P1784 is set, the corresponding solenoid valve is defective.

Q. Is either of diagnosis code P1773 (P0753), P1774 (P0758), P1775 (P0763), P1776 (P0768), P1777 (P0773) output?
YES diagnosis code P1773 (P0753) is set : Refer to diagnosis code P1773 (P0753): Low-reverse solenoid valve system .
YES diagnosis code P1774 (P0758) is set : Refer to diagnosis code P1774 (P0758): Underdrive solenoid valve system .
YES diagnosis code P1775 (P0763) is set : Refer to diagnosis code P1775 (P0763): Second solenoid valve system .
YES diagnosis code P1776 (P0768) is set : Refer to diagnosis code P1776 (P0768): Overdrive solenoid valve system .
YES diagnosis code P1777 (P0773) is set : Refer to diagnosis code P1777 (P0773): Reduction solenoid valve system .
Go to Step 3.

STEP 3. Hydraulic pressure test
Each hydraulic pressure of the elements below, which diagnosis codes indicate, should be within the standard value.

  • diagnosis code P1779: Underdrive clutch, low-reverse brake, reduction brake
  • diagnosis code P1780: Underdrive clutch, second brake, reduction brake
  • diagnosis code P1781: Underdrive clutch, overdrive clutch, reduction brake
  • diagnosis code P1782: Underdrive clutch, overdrive clutch, direct clutch
  • diagnosis code P1783: Overdrive clutch, direct clutch, second brake
  • diagnosis code P1784: Reverse clutch, low-reverse brake, reduction brake
OK: Refer to Hydraulic Pressure Test .

Q. Is the check result normal?
Go to Step 6.
NO some hydraulic pressures are abnormal : Go to Step 5.
NO all hydraulic pressure are abnormal : Go to Step 4.

STEP 4. Adjust the line pressure and recheck the diagnosis code.
(1)Adjust the line pressure (Refer to ).
(2)Test drive the vehicle.
(3)Check the diagnosis code.

Q. Is the diagnosis code set?
Go to Step 5.
The inspection is complete.

STEP 5. Disassemble, clean and assemble the valve body and recheck the diagnosis code.
(1)Check the mounting bolts for looseness, and the O-ring, solenoid valve and valve body for damage.
Replace the valve body assembly if the damages are thought to be irreparable.
(2)Test drive the vehicle.
(3)Check the diagnosis code.

Q. Is the diagnosis code set?
Go to Step 7.
The inspection is complete.

STEP 6. Replace the engine-A/T-ECU and then recheck the diagnosis code.
(1)Replace the engine-A/T-ECU.
(2)Test drive the vehicle.
(3)Check the diagnosis code.

Q. Is the diagnosis code set?
Go to Step 7.
The inspection is complete.

STEP 7. Check the A/T internal clutch and brake, and then recheck the diagnosis code.
(1)Check the following clutches or brakes according to the output diagnosis codes, replace if necessary.

  • If diagnosis code P1779, P1780, P1781, P1782 are set individually or in a group, replace the underdrive clutch.
  • If diagnosis code P1781, P1782, P1783 are set individually or in a group, replace the overdrive clutch.
  • If diagnosis code P1784 is set, replace the reverse clutch.
  • If diagnosis code P1779, P1784 are set individually or in a group, replace the low-reverse brake.
  • If diagnosis code P1780, P1783 are set individually or in a group, replace the second brake.
  • If diagnosis code P1782, P1783 are set individually or in a group, replace the direct clutch.
  • If diagnosis code P1779, P1780, P1781, P1784 are set individually or in a group, replace the reduction brake.
  • If diagnosis code P1779 is set, replace the one-way clutch (OWC-L).
  • If diagnosis code P1779, P1780, P1781 are set individually or in a group, replace the one-way clutch (OWC-D).
(2)Test drive the vehicle.
(3)Check the diagnosis code.

Q. Is the diagnosis code set?
Eliminate the cause of the noise.
The inspection is complete.