BRAKE PAD CHECK




 1.
caution If there is a significant difference in thickness between the brake pads at right and left, check the sliding area and the run-out of the brake disc (Refer to ).
Visually check the thickness of brake pad from the inspection hole of the caliper body.
Standard value:

    10.0 mm <Short wheelbase, Long wheelbase-3000, Long wheelbase-except 3000 (rear)>
    11.5 mm <Long wheelbase-except 3000 (front)>
Limit: 2.0 mm
2.If the brake pad thickness is less than the limit value, replace the brake pad (Refer to <Short wheelbase, Long wheelbase-3000> or <Long wheelbase-except 3000>).