REMOVAL AND INSTALLATION <4B1>



caution
  • When removing or installing the manifold absolute pressure sensor, be careful not to apply impact to the sensor.
  • Do not reuse the manifold absolute pressure sensor that has been dropped.
Pre-removal operation
  • Air Cleaner Assembly Removal (Refer to ).
  • Brake Booster Vacuum Hose Removal [Refer to GROUP 35A - Master Cylinder Assembly and Brake Booster <LHD>, <RHD>].
  • Throttle Body Assembly Removal (Refer to GROUP 13A - Throttle Body Assembly ).
  • Fuel Delivery Pipe and Fuel Injector Assembly Removal (Refer to GROUP 13A - Injector ).

Post-installation operation
  • Fuel Delivery Pipe and Fuel Injector Assembly Installation (Refer to GROUP 13A - Injector ).
  • Throttle Body Assembly Installation (Refer to GROUP 13A - Throttle Body Assembly ).
  • Brake Booster Vacuum Hose Installation [Refer to GROUP 35A - Master Cylinder Assembly and Brake Booster <LHD>, <RHD>].
  • Air Cleaner Assembly Installation (Refer to ).





Removal steps


1.
Control wiring harness connection


2.
Rocker cover PCV hose connection


3.
Emission vacuum hose

>>B<<
4.
Purge control solenoid valve

>>B<<
5.
O-ring

>>B<<
6.
Manifold absolute pressure sensor

>>B<<
7.
O-ring


8.
Engine oil level gauge


9.
Inlet manifold stay


10.
Inlet manifold stay


11.
Inlet manifold stay

>>A<<
12.
Injector protector front

>>A<<
13.
Inlet manifold


14.
Inlet manifold gasket


15.
Harness bracket


16.
Engine upper cover bracket

INSTALLATION SERVICE POINTS


For installation service points, follow the same service procedures as 10 MY OUTLANDER.