REMOVAL AND INSTALLATION


caution
  • Do not use impact wrench.
  • Do not drop or shock the G and yaw rate sensor.
  • When the G and yaw rate sensor is replaced or installed, always carry out calibration to make ASC-ECU learn the neutral point (Refer to ).
Pre-removal and Post-installation Operation
  • Lower Centre Pillar Trim <LH side> Removal and Installation (Refer to GROUP 52A - Trim ).
  • Front Seat Assembly <LH side> Removal and Installation (Refer to GROUP 52A - Front Seat Assembly ).
  • Turn up the floor carpet.




Removal steps


1.
 G and yaw rate sensor cover


2.
 G and yaw rate sensor connector


3.
 G and yaw rate sensor