Trouble symptom
|
Inspection procedure No.
|
Reference page
|
Communication with M.U.T.-III is not possible.
|
Communication with the engine-ECU only is impossible
|
-
|
GROUP 13B - Troubleshooting, Symptom Procedures, Inspection Procedure
1  <4B10>.
|
GROUP 13C - Troubleshooting, Symptom Procedures, Inspection Procedure
1 <4B11-Turbo>.
|
When the brake pedal is depressed, cruise control is
not cancelled.
|
1
|
|
When the clutch pedal is depressed, cruise control is
not cancelled <4B10-M/T>.
|
2
|
|
When the elector lever is set to "N" position, cruise
control is not cancelled <4B10-CVT>.
|
3
|
|
When the shift lever is set to "N" position, cruise
control is not cancelled <4B11-Turbo>.
|
4
|
|
When the "CANCEL" switch is set to ON, cruise control
is not cancelled.
|
5
|
|
Cruise control cannot be set (No response when the "COAST/SET"
switch and the "ACC/RES" switch is pressed) <4B10>.
|
6
|
|
Cruise control cannot be set (No response when the "COAST/SET"
switch and the "ACC/RES" switch is pressed) <4B11-Turbo>.
|
7
|
|
Hunting (repeated acceleration and deceleration) occurs
at the set vehicle speed <4B10-M/T>.
|
8
|
|
Hunting (repeated acceleration and deceleration) occurs
at the set vehicle speed <4B10-CVT>.
|
9
|
|
Hunting (repeated acceleration and deceleration) occurs
at the set vehicle speed <4B11-Turbo>.
|
10
|
|
When the "ON/OFF" switch is turned ON, the cruise control
indicator lamp does not illuminate. (However, the cruise control system is normal).
|
11
|
|