REMOVAL AND INSTALLATION


Pre-removal operation
  • Floor Console Assembly Removal (Refer to GROUP 52A - Floor Console Assembly ).
  • Rear Seat Cushion Assembly Removal (Refer to GROUP 52A - Rear Seat Assembly ).
  • Shoe and Lining Assembly Removal (Refer to <Except RALLIART> or <RALLIART>).
  • Front Floor Panel Rear Removal (Refer to GROUP 51 - Under Cover ).

 Post-installation operation
  • Front Floor Panel Rear Installation (Refer to GROUP 51 - Under Cover ).
  • Shoe and Lining Assembly Installation (Refer to <Except RALLIART> or <RALLIART>).
  • Rear Seat Cushion Assembly Installation (Refer to GROUP 52A - Rear Seat Assembly ).
  • Floor Console Assembly Installation (Refer to GROUP 52A - Floor Console Assembly ).
  • Parking Brake Lever Stroke Adjustment (Refer to ).
  • Parking brake lining seating procedure (Refer to ).





Removal steps


·
 Release the parking brake lever.


·
 Loosen the adjusting nut.
<<A>>
 >>A<<
 1.
 Parking brake rear cable connection


2.
 Clip


3.
 Parking brake rear cable

REMOVAL SERVICE POINT

<<A>> PARKING BRAKE REAR CABLE DISCONNECTION
Disconnect the parking brake rear cable according to the procedure below.
1.Release the parking brake, and loosen the adjusting nut.

2.Remove the floor console bracket rear mounting bolts.

3.Slide the floor console bracket rear, and disconnect the parking brake rear cable from the hole shown by the arrows.

INSTALLATION SERVICE POINT

>>A<< PARKING BRAKE REAR CABLE CONNECTION INSTALLATION

Install the parking brake rear cable connection, and then tighten the floor console bracket rear mounting bolts to the specified torque.
Tightening torque: 9.5 ± 3.5 N·m