|
|
1.Check that the wheel alignment is normal. (Refer to GROUP 33 - On-vehicle Service, Wheel Alignment Check and Adjustment (Refer to  .)
|
|
2.Place the front wheel onto the turning radius gauge, and measure the steering angle.
Standard value:
|
|
Inner wheel
|
40° 50’ ± 1° 30’
|
Outer wheel (reference value)
|
33° 50’
|
|
|
|
3.If the measured value is not within the standard value, adjust the tie-rod ends (right and left), and repeat Steps 1 and 2.
4.If the measured value is not within the standard value after performing Step 3, replace the steering gear and linkage assembly. (Refer to .)
|