REMOVAL AND INSTALLATION


Pre-removal and post-installation operation
  • Splash shield front removal and installation (Refer to ).
  • Front bumper side bracket removal and installation (Refer to GROUP 51, Front Bumper Assembly and Radiator Grille ).
  • Front delta garnish removal and installation (Refer to GROUP 51, Garnishes and Mouldings ).
  • Front deck garnish removal and installation (Refer to GROUP 51, Windshield Wiper ).
  • Headlamp assembly removal and installation (Refer to GROUP 54A, Headlamp ).
  • Side Turn-signal Lamp removal and installation (Refer to GROUP 54A, Side Turn-signal Lamp ).




Removal steps
<<A>>
 >>A<<
 1.
 Fender


2.
 Fender protector rear

REMOVAL SERVICE POINT

<<A>> FENDER REMOVAL
1.Remove the fender protector rear clips.

2.Slide the fender protector rear to access and remove the bolt as shown in the illustration.

INSTALLATION SERVICE POINT

>>A<< FENDER INSTALLATION
1.Temporarily install the fender protector rear to the fender.

2.Install the fender to the body with the bolt shown not installed.
3.Slide the temporarily-installed fender protector rear and tighten the bolt.