REMOVAL AND INSTALLATION <6G7>


Pre-removal and Post-installation Operation
  • Engine Coolant Draining and Refilling (Refer to ).
  • Air Intake Duct Removal and Installation (Refer to GROUP 15 - Air Cleaner ).
  • Radiator Lower Hose Removal and Installation (Refer to ).




Removal steps


1.
 Cooling water inlet hose fitting

>>A<<
 2.
 Thermostat

INSTALLATION SERVICE POINT

>>A<< THERMOSTAT INSTALLATION
caution Make absolutely sure that no oil adheres to the rubber ring of the thermostat. Also do not fold or scratch the rubber ring during installation.

Install the thermostat so that the jiggle valve is facing straight up. Be careful not to fold or scratch the rubber ring.