REMOVAL AND INSTALLATION <F5MBB/W5MBB, F6MBA/W6MBA>



warning Be careful not to subject the SRS-ECU to any shocks during removal and installation of the gearshift cable and select cable assembly.





Gearshift cable and select cable assembly removal steps


·
Rear floor console assembly (Refer to GROUP 52A - Rear Floor Console Assembly )


1.
Gearshift lever knob


2.
Sleeve <F5MBB/W5MBB>


·
Front floor console centre and floor console front (Refer to GROUP 52A - Front Floor Console Assembly )


·
SRS-ECU and SRS-ECU harness cover (GROUP 52B - SRS-ECU )


·
G and yaw rate sensor and G and yaw rate sensor bracket (Refer to GROUP 35C - G and Yaw Rate Sensor ) <Vehicles with ASC>

>>C<<
3.
Select cable connection (Gearshift lever side)
<<A>>
>>B<<
4.
Gearshift cable connection (Gearshift lever side)


·
Air cleaner assembly (Refer to GROUP 15 - Air Cleaner <4B1>, <4N1>)


·
Battery and battery tray (Refer to GROUP 54A - Battery )
<<B>>
>>A<<
5.
Select cable connection (Transmission side)
<<B>>
>>A<<
6.
Gearshift cable connection (Transmission side)
<<B>>
>>A<<
7.
Gearshift link clip

>>A<<
8.
Gearshift cable and select cable assembly



Gearshift lever assembly removal steps


·
Rear floor console assembly (Refer to GROUP 52A - Rear Floor Console Assembly )


1.
Gearshift lever knob


2.
Sleeve <F5MBB/W5MBB>


·
Front floor console centre and floor console front (Refer to GROUP 52A - Front Floor Console Assembly )

>>C<<
3.
Select cable connection (Gearshift lever side)

>>B<<
4.
Gearshift cable connection (Gearshift lever side)


9.
Gearshift lever assembly

REMOVAL SERVICE POINTS


For removal service points, follow the same service procedures as 10 MY OUTLANDER.

INSTALLATION SERVICE POINTS


For installation service points, follow the same service procedures as 10 MY OUTLANDER.