REMOVAL AND INSTALLATION


warning Be careful not to subject the SRS-ECU to any shocks during removal and installation of the gearshift cable and select cable assembly.
Post-installation Operation
  • Shift lock mechanism check ()
  • Selector lever operation check ()
  • Inhibitor switch and control cable adjustment ()




Selector lever assembly removal steps


·
 Move the selector lever to the "N" position.


·
 Rear floor console assembly (Refer to GROUP 52A - Rear Floor Console Assembly .)


1.
 Selector lever knob


2.
 Shift indicator panel


·
 Front floor console centre and floor console front (Refer to GROUP 52A - Front Floor Console Assembly .)


3.
 Transmission control cable connection (selector lever side)


4.
 Selector lever assembly



Transmission control cable removal steps


·
 Move the selector lever to the "N" position.


·
 Rear floor console assembly (Refer to GROUP 52A - Rear Floor Console Assembly .)


1.
 Selector lever knob


2.
 Shift indicator panel


·
 Front floor console centre and floor console front (Refer to GROUP 52A - Front Floor Console Assembly .)


·
 SRS-ECU, SRS-ECU harness cover (Refer to GROUP 52B, SRS-ECU .)


·
 G and yaw rate sensor and G and yaw rate sensor bracket (Refer to GROUP 35C, G and Yaw Rate Sensor .)


·
 Air cleaner body (Refer to GROUP 15 - Air Cleaner .)


·
 Battery and battery tray (Refer to GROUP 54A, Battery .)


5.
 Transmission control cable connection (transmission side)


6.
 Transmission control cable