REMOVAL AND INSTALLATION



Pre-removal and Post-installation Operation
  • Discharging and Recharging refrigerant (Refer to )
  • Air Cleaner Intake Duct Removal and Installation (Refer to GROUP 15 - Air cleaner <4A9>, <4B10>, <4B11-Turbo> or <BWC>).
  • Headlamp support panel cover Removal and Installation (Refer to GROUP 51, Front bumper and radiator grille ).
  • Hood latch Removal and Installation (Refer to GROUP 42A - Hood <Except RALLIART> or <RALLIART>).





Removal steps


1.
Headlamp support upper panel (Refer to GROUP 42A - Loose panel )


2.
A/C pressure sensor connector
<<A>>

3.
Discharge flexible hose connection
<<A>>

4.
Liquid pipe A connection


5.
O-ring


6.
Condenser assembly
note Condenser fan removal and installation (Refer to GROUP 14 - Radiator <4B10>, <4B11-Turbo> or <BWC>).

REMOVAL SERVICE POINT



<<A>> DISCHARGE FLEXIBLE HOSE/LIQUID PIPE A DISCONNECTION


caution Use the plug which is not breathable because A/C compressor oil or receiver have high hygroscopicity.
Plug the removed nipple of the pipe, hose and condenser to prevent the entry of dust and dirt.